For years there was one dependable solution to store info on your computer – working with a hard drive (HDD). Then again, this sort of technology is by now showing its age – hard disk drives are actually noisy and sluggish; they’re power–ravenous and are likely to create a lot of warmth throughout intense procedures.

SSD drives, in contrast, are fast, take in way less power and are also much cooler. They furnish an innovative strategy to file accessibility and storage and are years in front of HDDs when it comes to file read/write speed, I/O operation as well as energy effectivity. Observe how HDDs fare up against the modern SSD drives.

1. Access Time

Image

With the introduction of SSD drives, data access speeds are now tremendous. Due to the brand new electronic interfaces utilized in SSD drives, the typical data file access time has shrunk towards a record low of 0.1millisecond.

Image

HDD drives even now makes use of the very same general file access technique that’s actually developed in the 1950s. Despite the fact that it was noticeably improved ever since, it’s sluggish compared with what SSDs are offering to you. HDD drives’ data access speed varies in between 5 and 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is important for the overall performance of a file storage device. We have run substantial lab tests and have established an SSD can handle a minimum of 6000 IO’s per second.

Image

With an HDD drive, the I/O performance steadily enhances the more you apply the disk drive. Even so, in the past it extends to a specific limitation, it can’t get speedier. And due to the now–old concept, that I/O limit is significantly lower than what you might have with a SSD.

HDD are only able to go so far as 400 IO’s per second.

3. Reliability

Image

SSD drives lack any rotating components, meaning there’s far less machinery inside them. And the less actually moving components you can find, the lower the likelihood of failing are going to be.

The normal rate of failure of an SSD drive is 0.5%.

Image

As we have previously documented, HDD drives depend on spinning hard disks. And anything that takes advantage of a large number of moving elements for extended periods of time is more prone to failure.

HDD drives’ normal rate of failure ranges somewhere between 2% and 5%.

4. Energy Conservation

Image

SSDs are lacking moving components and require almost no cooling down energy. In addition, they call for a small amount of power to work – lab tests have established that they’ll be operated by a regular AA battery.

As a whole, SSDs take in somewhere between 2 and 5 watts.

Image

HDD drives are infamous for getting noisy; they are prone to overheating and in case you have several disk drives in a single hosting server, you will need a further a / c device simply for them.

All together, HDDs use up in between 6 and 15 watts.

5. CPU Power

Image

As a result of SSD drives’ better I/O performance, the main hosting server CPU will be able to process file demands more quickly and conserve time for other functions.

The common I/O wait for SSD drives is just 1%.

Image

HDD drives allow for slower accessibility speeds than SSDs do, which will result for the CPU needing to delay, while reserving assets for your HDD to discover and give back the requested data.

The standard I/O wait for HDD drives is around 7%.

6.Input/Output Request Times

Image

It’s time for a few real–world cases. We, at Steves Website Hosting, produced a detailed platform backup with a server using only SSDs for data storage uses. In that procedure, the average service time for any I/O query stayed beneath 20 ms.

Image

All through the very same trials sticking with the same server, now fitted out using HDDs, general performance was considerably reduced. During the web server back up process, the common service time for I/O demands fluctuated somewhere between 400 and 500 ms.

7. Backup Rates

Image

Another real–life improvement will be the rate at which the data backup is created. With SSDs, a web server back up now will take no more than 6 hours by making use of Steves Website Hosting’s hosting server–designed software.

Image

On the flip side, with a web server with HDD drives, an identical back–up normally requires three to four times as long to complete. An entire back–up of any HDD–powered web server may take 20 to 24 hours.

With Steves Website Hosting, you will get SSD–driven website hosting services at the best prices. Our website hosting incorporate SSD drives by default. Get an hosting account with us and witness how your sites will become better automatically.


  • Service guarantees

  •  
  • Join us now. You won’t see any installation fees you’ll also find full root/administrator access to your server. 99.9% network uptime is warranted.
  • Compare our prices

  •  
  • Review the tools and characteristics offered by Steves Website Hosting’s Virtual Private Servers. You could start with a smaller VPS setup and upgrade with a mouse click as your needs expand.
  • Compare our hosting plans
  • Contact Us

  •  
  • Contact us 24x7x365 by email or by utilizing our super–fast ticketing platform. Our techs are ready to reply to any of your inquiries within 1 hour.